DIY | Chokers with Seed Beads

Created on

DIY | Chokers with Seed Beads

Dear reader
In this blog post, we at Smyks.com have been working with seed beads in new bead patterns that are incorporated into beautiful tight choker-style necklaces. The looks can vary in style from the truly romantic to the more bohemian to the really retro. Inspiration is drawn from old crochet and lace patterns for pretty runners, borders and the like, as well as from our previous blog posts. Follow the patterns and you'll be able to create your own designs in the bead colors that suit you. Of course, the jewelry techniques can also be used for bracelets and many other jewelry pieces, the only limit is your imagination. And remember, you can always contact us or visit Smyks' bead shop in Copenhagen, Denmark, where we stand ready to help you with your jewelry projects.
Enjoy the tutorials :-)

 

Chokers, blue tear-drops Chokers, hanging flowers
   
Chokers, flower wreath Chokers, small flowers

 

Choker with Blue Teardrops

 

 

For this choker, we used the following DIY jewellery components:

Miyuki seed beads, size #11, dark teal picasso

Miyuki seed beads, size #11, turquoise blue picasso

Miyuki seed beads, size #11, golden duracoat

Beads, faceted, 3mm, gold-plated brass

Celestial crystal, blue teardrops

Celestial crystal, rondelle beads, dark green

Crimp end with eyelet, gold-plated sterling silver

Jumprings, open, 4mm, gold-plated sterling silver

Lobster claw clasp, 9mm, gold-plated sterling silver

Chain extender, gold-plated sterling silver

+ FireLine, 8LB, black (approx. 2-2,5m)

+ Beading needle

+ Chain-nose pliers

+ Jewellery glue

+ Scissors

String 1 seed bead ... and sew through the bead one more time to form a loop. 

Tighten the thread  and tie a few additional knots. Apply a bit of glue so the knots won't open up again.

Cut off the excess thread. Pull the thread through the crimp end. Instead of using a bead, you can tie knots. But the thread is thin. You have to tie enough knots to ensure that the thread cannot be pulled out of the hole in the crimp end.  

Close the crimp end.

String the seed beads shown in the picture: 5  blue + 1 golden + 5 blue + 1 golden + 4 turquoise + 1 golden + 2 turquoise ...  

followed by 1 faceted golden bead + 1 crystal teardrop + 1 golden seed bead.

Skip the last seed bead ... and sew back through the teardrop and the faceted bead.

String the next row of seed beads as shown in the picture: 2 turquoise + 1 golden + 4 turquoise + 1 golden + 5 blue + 1 golden + 3 blue.

 

Sew back through the very first golden seed bead. 

Then you string the beads shown in the picture: 2 blue + 1 golden + 3 blue + 1 green crystal + 3 bue.

Sew back through the golden seed bead.

Tighten the thread. String 2 blue seed beads ... and sew through the golden seed bead (see picture).

Tighten the thread.

 

String the seed beads shown in the picture: 3 blue + 1 golden+ 5 blue. Then you sew back through the golden bead (see picture).

String the beads shown in the picture: 4 turquoise + 1 golden + 2 turquoise + 1 faceted golden bead + 1 crystal teardrop + 1 golden seed bead. 

Skip the golden seed bead ... and sew back through the teardrop and the faceted bead. 

String the beads shown in the picture ... and sew back through the golden seed bead (see picture).

String the beads shown in the picture ...

... and sew back through the golden seed bead on top (see picture).

Tighten the thread. Continue like this until the choker has reached the length you want. 

String 5 blue seed beads + 1 crimp end + 1 seed bead. 

Sew through the golden bead one more time to form a loop.

Tighten the thread.

Pull the bead down to the crimp end. Tie a few extra knots and apply a bit of glue. After that, you cut off the excess thread. 

Close the crimp end (with the help of chain-nose pliers). 

The clasp and the chain extender are fastened with the help of jumprings. 

Your choker is done. You can also adapt this design to make necklaces, bracelets or ankle bracelets. 

 

Choker with Seed Beads and Daisies

 

 

For this choker, we used the following DIY jewellery components:

Miyuki seed beads, size #11, red luster

Miyuki seed beads, size #11, ruby matte

Miyuki seed beads, size #11, golden duracoat

Miyuki seed beads, size #11, carnation pink

Seed beads, size #8, striped red/white

Crimp ends with eyelet, gold-plated sterling silver

Jumprings, open, 4mm, gold-plated sterling silver

Lobster claw clasp, 9mm, gold-plated sterling silver

Chain extender, gold-plated sterling silver

+ FireLine, 8LB, white (approx. 2-2.5m)

+ Beading needle

+ Chain-nose pliers

+ Jewellery glue

+ Scissors
 


 

The procedure is the same as in the example above. The crystal teardrops are replaced by seed bead daisies. 

This is how you assemble the daisies: Instead of the faceted golden bead and the crystal teardrop, you string 1 golden seed bead + 4 pink seed beads + 1 red seed bead.

Then you sew back through the first pink bead. 

String another 4 pink seed beads ... and sew through the next pink bead (see picture).

Then you sew through the next 3 pink beads and the golden bead.  

Continue like that, until the choker has reached the length you want.

 

Choker with Daisies

 

 

For this choker, we used the following DIY jewellery components:

Miyuki seed beads str. #11, red luster

Miyuki seed beads str. #11, fir green

Cubic Zirconia, faceted, 3mm, orange/red

Jumprings, closed, 5mm, gold-plated sterling silver

Lobster claw clasp, 9mm, gold-plated sterling silver

+ FireLine, 8LB, black (approx. 1.5m)

+ Beading needle

+ Chain-nose pliers

+ Flat-nose pliers

+ Jewellery glue

+ Scissors
 

 

String 1 lobster claw clasp + 7 green seed beads.

Sew through the beads and the clasp one more time in order to form a circle. 

Tighten the thread ... and tie 3 knots.

Sew through the clasp and the next bead ...

.... and continue through the next 3 beads. Apply a bit of glue on the knot and cut off the excess thread.

String 6 red seed beads + 1 cubic zirconia bead.

Sew back through the first red seed bead ...

... and tighten the thread.

String 4 red seed beads ... and sew through the red seed bead on top of the flower (see picture).

Tighten the thread.

String 3 green seed beads ...

... and sew back through the green bead in the middle.

Tighten the thread.

String 2 green seed beads ...

... and sew back through the first of the last two green beads.

Tighten the thread.

String 1 green bead.

After that, you string again 6 red seed beads + 1 cubic zirconia bead ... and sew through the first red seed bead. 

String 4 red seed beads ... and sew through the red bead on top of the flower (see picture). 

 

Continue like that until the choker has reached the length you want.

String 7 green beads and 1 closed jumpring.

Sew through 1 red bead + 7 green beads + the closed ring one more time. 

Now, the green beads form a circle in the closed ring. Fasten the thread by sewing through random beads. 

Cut off the excess thread.

Optionally, you can add a chain extender to make the choker adjustable in length.

 

Choker with Double Row of Daisies

 

 

For this choker, we used the following DIY jewellery components:

Miyuki seed beads, size #11, pink mix 

Crimp ends with eyelet, gold-plated sterling silver

Jumprings, open, 4mm, gold-plated sterling silver

Lobster claw clasp, 9mm, gold-plated sterling silver

Chain extender, gold-plated sterling silver

+ FireLine, 8LB, white (approx. 2-2.5m)

+ Beading needle

+ Chain-nose pliers

+ Jewellery glue

+ Scissors
 

 

First, you fasten a crimp bead at the end of the thread (see the first example in this blog post).

String the seed beads shown in the picture.

Sew through 3 golden seed beads + 1 red seed bead (see picture).

Tighten the thread.

String 3 red beads. Skip 1 golden bead ... and sew through the next red bead + 1 golden bead.

Tighten the thread.

Sew through the next 2 golden beads. 

String the beads shown in the picture.

Sew through 3 golden beads + 1 pink bead. 

Tighten the thread.

String 3 pink beads. Skip 1 golden bead and sew through the next pink bead + 1 golden bead. 

Then you sew through the next 2 golden beads. 

String the beads shown in the picture. 

Sew through 3 golden beads + 1 purple bead. 

Continue like that until the choker/bracelet has reached the length you want. 

Finally, you finish off the choker/bracelet as shown in the first example in this blog post. 

 

Have fun :-)


No comment(s)
Write your comments