DIY earrings with triangular decorations

Created on

DIY earrings with triangular decorations

smykker med trekantede vedhćng

 

Make your own line of exciting designs with beautiful triangular jewelry pieces.
Below we show you five examples on how to use the triangle jewelry pieces to make beautiful earrings, simple and easy. Note, the triangles are available both silver plated and gilded brass, as well as with a frosted or shiny surface. All the examples can be made in both colours with supplies from Smyks.com


Earrings made of triangles

You will need the following materials:

4pcs.gilded brass triangles
1 pair of gilded earstuds wih a flat pad
2pcs. 4mm gilded jumprings

Glue the earstud onto one of the triangles. (grind or sand the earstud pad with sandpaper or a file before you start gluing, as this will help the glue sticking). Connect the two triangles with a jumpring. Viola! Your earrings are now done.

řrestik med 2 stk. trekantede vedhćng

Earrings with black star earstuds

For these earrings you’ll need the following materials:
2pcs. small gilded brass triangles
1 pair of earstuds with small stars, black silver

The only thing you need to do here is to put the earstuds through the hole of the triangles, and your earrings are done, it doesn’t get easier than that.

řrestik med stjerner og trekantede vedhćng

Earrings with long triangles
For these elegant earrings you’ll need the following materials:

2pcs. gilded brass triangles
2pcs. oblong gilded brass triangles
1 pair of 4mm gilded earstuds with a flat pad
2pcs. 6mm gilded jumprings

First glue the earstud on the small triangle. Next attach the little and the long triangle with the jumpring. Your earrings are now done.

řrestik med trekanter i forgyldt messing

Earrings with brushed earstuds
For these earrings you’ll need the following materials:

2pcs. small gilded brass triangles
1 pair of brushed gilded round coin earstuds with an eye

Carefully open the eyeof the earstud, attach the triangle and then close the eye again. Your earrings are now done, quick and easy.

řrestikker med břrstede mřnter og trekanter

Triangular earstuds with a dangling chain

For these earrings you’ll need the following materials:

2pcs. gilded brass triangles
1 pair of gilded 4mm earrings with a flat pad
1 pair of gilded earwires with a peg and eye (only available in silver & oxidised)

First you glue the pad of the earring onto the triangle. Because the eye is closed, you will have to open it. Use a pair of flush-cut pliers to cut it open. Open it so that you can attach the triangle, then close the eye again. Your earrings are now done.

trekantede řrestikker med kćde

 

Do you have any questions or comments? Feel free to write them in the comment section below.


No comment(s)
Write your comments